Netrinos EdgeNode v1.3.1 Release Notes

Release Date: 2026-03-18

Overview

Version 1.3.1 adds WireGuard obfuscation for networks with DPI firewalls, faster peer identity checks, and improved connection reliability.

WireGuard Obfuscation (Cloak)

Some enterprise firewalls block WireGuard traffic using Deep Packet Inspection. Cloak disguises WireGuard traffic so it passes through these firewalls undetected, with no changes to your port forwarding rules or other EdgeNode configuration.

Enabling Cloak

1. Log into the Netrinos portal
2. Select the EdgeNode
3. Enable Cloak in the device settings
4. The EdgeNode picks up the change within 60 seconds

If you run a relay server, port 443 is recommended as the listen port for the strictest firewalls.

Faster Peer Identity Check

Peer identity verification is now significantly faster (2-80ms, down from 200-300ms). Automatic for v1.3.1 peers, with seamless fallback for older versions.

Connection Reliability

• Non-disruptive connection testing: Direct reachability is verified before changing routing, so existing connections are never interrupted during testing
• NAT auto-recovery: Connections recover automatically when firewalls kill long-lived UDP sessions
• Smarter relay fallback: Faster and more reliable fallback when direct connections are blocked
• Better endpoint discovery: Peer addresses discovered from actual traffic, eliminating stale connection problems

CLI Changes

• netrinos lport - Shows the public listen port (replaces wgport)
• netrinos id - Shows test protocol in Via column
• netrinos log clear - Rotates logs, preserves previous log

Web UI

• Devices page: Click-to-edit device names, cleaner layout
• Status page: Virtual devices collapse under parent peer
• Logs page: Log level selector in header bar

Portal

• Port forwarding rules and Virtual Devices are now visible in the Netrinos portal

Fixes

• Fixed port forward rules lost on firewall rebuild
• Fixed relay routing briefly unavailable during startup
• Fixed Virtual Device routes reset on each sync cycle
• Fixed rare high CPU usage on netrinos ver (aarch64)
• Fixed intermittent peer connectivity drops after restarts

Compatibility

• Works with v1.2.4, v1.2.5, v1.2.6, and v1.3.0 clients
• Cloak requires v1.3.1 on both peers for direct connection
• No configuration changes required for non-cloak users

Updating

Use the Upgrade button on the Settings page, or:

netrinos upgrade